The following are step by step instructions for successfully installing and activating a networked P82 or P62 console in a consumer setting.
Step 1 - Establish an Account (completed by dealer)
Prior to installation you will need to establish an internal account within Precor using our online application.
Preva Business Suite (PBS) Account Request - for Home Users
Once complete, you will receive an email within a few business days confirming your account creation along with a registration code that your installation team will need.
Step 2 - Connect to the Preva Network
Access the "Settings" menu by following the steps below:
While pressing & holding the "Volume Down" button, simultaneously press in the following order:
Channel Up
Channel Down
Channel Down
Channel Up
A key pad will appear on the screen - type in the code: 5 1 7 6 5 7 6 1
Select "System Settings" and then "Connectivity"
Choose how you would like the equipment to access the internet either "Wi-Fi" or "Hard Wired"
Note: If you choose "Wi-Fi" you will need to enter your network password
Look for an IP address to appear in screen - this indicates the console is connected to the internet
Select "Preva Server" and enter: na.preva.com
Your console is now connected to the Preva network
Step 3 - Register the Equipment
Once again access System Settings and select "Register Equipment".
Answer the following questions:
User Name = [email protected]
Password = password
Location Code = Found on registration email from dealer
Base Serial Number = Found on base
Name Your Equipment = Your choice
Select "Go" and "Confirm"
Congratulations! You have successfully completed a networked P82 / P62 Home install.
For Additional Preva Resources, visit https://www.precor.com/support/pbs